Power supplies – Gateway 8450R User Manual
Page 83
82
Replacing and Adding Internal Devices
9
Replace the EMI foam in the same orientation it was in when you
removed it.
10
Close the case. (See “Closing the case” on page 31.)
11
Reconnect the peripherals and the power cord, then turn on the server.
You may need to reconfigure the server after installing some expansion cards.
You may also need to install software that came with the card. Check the card
documentation for additional information.
Power supplies
The server ships with as many as three 350-W hot-swap power supply
modules. With all three modules, the server provides N+1 power supply
redundancy, letting you hot-swap a power supply module if one fails. If the
power distribution system fails you must replace the entire power supply.
8506284.book Page 82 Thursday, July 13, 2000 11:43 AM