Replacing the hot-plug pci indicator board – Gateway 8450R User Manual
Page 98
Advertising
Replacing the hot-plug PCI indicator board
97
Replacing the hot-plug PCI indicator
board
The hot-plug PCI indicator board is mounted on the back panel of the chassis,
above the hot-plug PCI slots.
To replace the hot-plug PCI indicator board:
1
Turn off the server and disconnect the power cord and all external
peripherals.
2
Remove the back top panel. (See “Removing the back top panel” on
page 28 and “Preventing static electricity discharge” on page 25.)
3
Disconnect the cable from the hot-plug PCI indicator board. Note the
location and orientation of the cable as you remove it.
4
Remove the two thumbscrews that secure the board to the back panel,
then remove the board from the server.
8506284.book Page 97 Thursday, July 13, 2000 11:43 AM
Advertising