Grizzly COMBINATION SANDER G1183 - Manual (Page 27)

model g1183/g1276 (mfg. since 3/10)
-25-
Table Tilt
angle sanding is performed with the table tilted
away from 0° (perpendicular to the sanding sur-
face). Compound angles are sanded using a com-
bination of table tilt and miter gauge angle.
Table Tilt Ranges
sanding Belt table .......................... -45° to +45°
sanding disc table ......................... -40° to +30°
Both tables have an adjustable positive stop that
is used to quickly return the table to 0°. the belt
table has an additional stop at -45° and uses a flip
stop to engage the stops. the disc table has an
additional stop at -40° underneath the table (see
figures 27–29).
figure 27. sanding belt table tilting controls.
positive
stops
Flip
stop
pointer
& scale
lock
lever
figure 28. sanding disc table tilting controls.
pointer
& scale
0° positive
stop
lock Knob
(1 of 2)
figure 29. sanding disc table -40° positive stop.
-40° positive
stop
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. failure to do so could result in
serious personal injury, damage to equip-
ment, or poor work results.