Master Chef 85-1027-0 - Manual (Page 13)

10
6
Attach the shelf mount-1 (CA) and shelf mount-2 (CB)
inside the side shelf panel (CC) by using ST 4.2 x 10 self
tapped screw and plastic bushing. Same process for the other
side shelf assembly.
4
1. Assemble the heat reflector assembly (BE) onto the
burner box.
2. Assemble the heat element assembly (BD) to the right side
of burner box as shown by using No.10 x 3/8” screws (x2)
and No.10 nuts (x2). After finishing this step, properly
insert the whole assembly on to the heat reflector.
3. Then put the cooking grate onto the burner box which
should be above all components in previous two points.
5
1. Assemble the top lid assembly (A) to the burner box
assembly by connecting the upper and lower hinges with
1/4 x 1 3/8” screws (x2) and 1/4” nuts (x2) to connect
the upper and fire box hinges together.
2. Assemble the thermometer assembly (AG) into the hole
which is on the top lid by using attached wing nut.
[WPE 039] E20101 BBQ Manual E 12/22/04 2:05 AM Page 10