METRObility Optical Systems 8100 - Manual (Page 11)

Introduction 11
be issued.
Managed CenturyStack RMON Management enables users to set up Event
Groups. The Event Group Implementation of the Event Group is optional.
The Event Group controls the generation and notification of events from
the hub. Each entry in the event Table describes the parameters of the
event that can be triggered. Each event entry is fired by an associated
condition located in the MIB. An event entry may also be associated with
a function elsewhere in the MIB that will be executed when the event is
generated. For example, a channel may be turned on or off by the firing of
an event. Each entry may optionally specify that a log entry be created on
its behalf whenever an event occurs. Each entry may also specify that
notification should occur by way of SNMP trap messages. In this case, the
community for the trap message is given in the associated event Commu-
nity object. The enterprise and specific trap fields of the trap are deter-
mined by the condition that triggered the event. Two traps are defined:
rising Alarm and falling Alarm. If the event Table is triggered by a
condition specified elsewhere, the enterprise and specific trap fields must
be specified for traps to be generated for that condition.
Users can create up to 32 Event Entries.