METRObility Optical Systems 8100 - Manual (Page 24)

24 CenturyStack 8100 Managed Hub
Trap Receiver
The Trap Receiver Setup Menu allows setting up a maximum of six trap
receivers. Users can setup trap receivers to receive traps when network
violations occur.
Trap Receiver Setup Menu
To set up Trap Receivers enter an Index number, a SNMP Trap Receiver
Name, the SNMP manager IP Address of the trap receiver, and set the
Status. When all information is entered, select Add.
To edit an existing trap receiver, enter its index number and the new
information and select Save.
To delete a trap receiver, enter its index number and select Delete.
Trap Receivers that have their Status set to “Disable” do not receive traps.