METRObility Optical Systems 8100 - Manual (Page 33)

Controlling CenturyStack Hubs 33
6. Enable the Link Switch Over Notify. (Optional)
7. Enable the Status.
8. Select Save to update the new Linked Pair. Repeat these
steps for each Link Pair.
Editing a Link Pair
Users can edit a Link Pair by entering the Link Pair number (of an
existing Link Pair) and reconfiguring the rest of the columns, then select
Save. The Link Pair is updated to the new settings.
Deleting a Link Pair
Users can delete a Link Pair by entering the Link Pair number (of an
existing Link Pair) and setting the Status to Invalid, then select Save.
The Link Pair is removed.