Memorex MT1701 - Manual (Page 12)

11
CONNECTION USING S-VIDEO CABLE:
Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT
INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s AUDIO left and right AV1 IN jacks.
3. Connect the VCR’s S-VIDEO OUT jack to the TV’s S-VIDEO AV1 IN jack.
4. Press the TV/AV/PC button until AV1/S-V appears on the TV screen and press PLAY on the VCR to watch a tape.
VCR
AUDIO Cord
To AV1 AUDIO IN jacks
To S-VIDEO IN jack
From VCR AUDIO
OUT jacks
INCOMING CATV CABLE
VCR CONNECTIONS (CONTINUED)