Memorex MT1701 - Manual (Page 14)

13
DVD CONNECTIONS (CONTINUED)
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AUDIO left and right AV2 IN jacks.
2. Connect a video cable from the DVD’s Component Out jacks to the TV’s AV2 IN (Cr, Cb, Y) jacks.
3. Press the TV/AV/PC button until AV2 appears on the TV screen and press PLAY on the DVD to watch a DVD.
DVD PLAYER
From COMPONENT
VIDEO OUT Jacks
From AUDIO
OUT Jacks
To AUDIO
IN Jacks
To COMPONENT IN jacks
REAR OF TV
REAR OF TV
CONNECTION USING COMPONENT CABLES:
Follow the instructions below to connect a DVD player to your television using the Cr, Cb, Y jacks. (CABLES NOT INCLUDED.)
NOTE:
Connecting the DVD player to the TV using the component cables will provide the highest quality picture.
Connecting using an S-video cable will provide the next highest quality picture, followed by standard Audio/Video
cable connection.