Memorex MT1701 - Manual (Page 18)

17
TV MENUS
TV MODE
When the TV is set to the TV mode, the menu lets you customize the unit by allowing you
to change various settings as follows:
1. Press the MENU button on the main unit or the ® button 1 on the remote to access
the on-screen menu.
2. Select one of the options at the top of the screen (AUDIO, VIDEO, SYSTEM, C.C. or
V-CHIP) using the Navigation g 2 or c 3 button.
3. Use the Navigation a 4 or e 5 button to select one of the setup options, then press
the Navigation g 2 or c 3 button to adjust it as per the following steps.
YOU MUST BE IN TV MODE TO ACCESS THESE MENUS. TO ENTER TV MODE, SIMPLY
PRESS THE TV/AV/PC BUTTON UNTIL TV OR CATV APPEARS ON THE SCREEN.
3
4
5
2
1
If AUDIO option is selected, you can set the following:
TREBLE:
Adjust for best treble (high) response.
BASS:
Adjust for best bass (low) response.
BALANCE:
Adjust for best balance between the left and
right speakers. Usually setting this option in the middle is
optimal.
TREBLE
BASS
BALANCE
1
1
2
1
AUDIO MENU
If VIDEO option is selected, you can set the following:
BRIGHT:
Adjusts the brightness of the image.
PICTURE:
Adjusts the contrast of the image.
COLOR:
Adjusts the color intensity.
HUE:
.Adjusts the red-green color balance of the unit.
SHARP:
Adjusts the sharpness of the image.
AUDIO VIDEO SYSTEM C. C. V-CHIP
BRIGHT
PICTURE
COLOR
HUE
SHARP
1
VIDEO MENU
If SYSTEM option is selected, you can set the following:
MTS:
Adjust the MTS setting to select the desired audio
option (STEREO, SAP or MONO). You can also select the
desired audio option using the remote, see page 25.
MUTE:
Select YES to mute the sound or NO for normal
sound. You can also mute the TV using the remote, see
page 25.
LANGUAGE:
Select a language, which is used for the on-
screen display (ENGLISH, JAPANESE or CHINESE).
SLEEP:
Select a desired sleep time of 30, 60 or 90
minutes. The TV will then turn off after the selected amount
of time.
TV/CATV:
Select CATV if using cable television or TV if
using an outdoor antenna.
CH. SEARCH:
Select YES to start auto channel scan (see
page 22).
CH. MEMORY:
Select YES to add a channel into memory
or NO to remove a channel from memory (see page 23).
RECALL:
Select YES to recall the original video setting.
AUDIO VIDEO SYSTEM C. C. V-CHIP
1
SYSTEM MENU