Mr Handsfree Blue Vision II - Manual (Page 9)

GB - 6
Redialing the last dialed number
Press the Reject button (6) or the Reject button (15) on the remote control while no call is in progress. J You will hear a double beep
and the phone will dial the last dialed number.
ENDING A CALL
Press the Reject button (6) or the Reject button (15) on the remote control to end the call with your mobile phone.
ANSWERING A CALL
Press the Talk button (5) or the Talk button (14) on the remote control.
AUTOMATIC ANSWER
If the Automatic answer function is set on your phone, the phone automatically answers the incoming call after some rings.
REJECTING A CALL
Press the Reject button (6) or the Reject button (15) on the remote control.
SECOND INCOMING CALL
If you get a second call during a conversation, you will hear a beep tone and you have the following two options:
1. Press the Talk button (5) or the Talk button (14) on the remote control to receive the second call and put the current call on hold.
J You can press the Talk button (5) or the Talk button (14) on the remote control again to switch between the two calls.
2. Press the Reject button (6) or the Reject button (15) on the remote control to receive the second call and reject the current call.
Note:
Some phones don’t support this feature via Bluetooth
® or require confirmation from the telephone menu.
ADJUSTING THE CARKIT SPEAKER VOLUME
When your phone and the carkit just paired, the volume is set in the middle level automatically. Press the Volume Up button (2 or 17)
to increase the volume level or the Volume Down button (3 or 18) to decrease the volume.
When the maximum or minimum level of the carkit’s speaker is reached, you will hear a loud beep tone.
PRIVATE CALL (SWITCHING CALLS BETWEEN CARKIT AND MOBILE PHONE)
To switch the call from the carkit to the mobile phone, press the Mute button (16) on the remote control. J You will hear a double beep
tone and the call will be transferred to your mobile phone. J To switch the current phone call from your mobile phone to the carkit press
the Mute button (16) again or select the corresponding item in the phone’s menu (depending on your mobile phone).
DTMF COMMANDS
If you need to dial a DTMF command during a call, use the digital keypad (20) on the remote control. J Press the Talk button (14) on
the remote control to send the DTMF command.
HANDSFREE / HEADSET MODE
Some phones require Bluetooth ® operation in Headset mode.
To activate the Headset mode, switch off the Blue Vision II. J Press and hold the Talk button (5) and switch on the power. You will hear
a melody tone. J Disconnect your mobile phone and the Blue Vision II as described in the chapter “Disconnection”. J Restore the
Bluetooth
® connection as described in the chapter “Connection”. J From now your Blue Vision II will work with your phone in Headset
mode. J To restore the Handsfree mode operation, you should repeat this procedure.