MGE UPS Systems EXB10Rack - Manual (Page 18)

14 Pulsar EX Rack: 86-153522-00 MGE UPS SYSTEMS
operation on battery
no utility power
your load is supplied by the utility power
(on line)
At whatever point the utility power
returns, Pulsar switches to normal
operation:
return of utility power load charge percentage
Note:
The alarm silence button is to deactivate or
activate the audio warning device when
operating on battery, or when site wiring
fault occured.
If utility power is present, hold alarm
silence button in:
x +
ε
mn x mn 0 mn
Pulsar switches off
automatically warning alarm at low
battery
indicating the
remaining battery
time: here, between
75 and 87%
silence 1 beep every 10 s
your load is supported
by the battery you have less than 12% battery time
remaining: power down your load, Pulsar
will soon switch off automatically UPS output "off"
1 beep every 3 s
break in utility power
indicating the battery
recharge percentage:
here, between 12 and
25%
silence
indicating the load
charge percentage:
here 50%
silence