MGE UPS Systems EXB10Rack - Manual (Page 6)

iv Pulsar EX Rack : 86-153522-00 MGE UPS SYSTEMS
software supplied with
Pulsar EX10
Rack and
EX15 Rack
To meet the different operating
environments of your UPS, Pulsar EX
Rack
includes 2 MGE UPS SYSTEMS software
programs:
c EX-Driver software for Windows;
c Network based Solution-Pac TM power
management software.
EX-Driver for Windows
EX Driver for Windows provides
communication with the UPS from a simple
Windows workstation. EX-Driver is
compatible with Windows 3.1x and Windows
95/98, for communication with the UPS via a
serial connection for various needs:
c personalization of the UPS operating
mode: the EX-Tuner utility, can be used to
change certain UPS operating parameters if
the standard factory settings are not ideal for
the operating conditions.
It is possible to modify the output voltage,
battery-test frequency, startup and shutdown
sequences, operation of automatic by-pass,
etc.;
Solution-Pac TM for networks and
multi-server systems
Protection by UPS is only complete and
effective if combined with powerful software
functions which warn users and the operator
of any power supply problem, automate
system shutdown, supervise and remotely
control the UPSs. MGE UPS SYSTEMS
created Solution-Pac
TM for this purpose.
Solution-Pac TM combines all these functions
in a single CD-ROM, usable in local or
remote mode (TCP/IP and SNMP), and
covering the main network environments.
Solution-Pac
TM is the ideal solution for
protecting networks and multiserver
systems.
Solution-Pac
TM on a single CD-ROM
contains everything needed to safeguard
one or more systems and to supervise one
or more UPSs from a local or remote station.
Solution-Pac
TM includes SNMP proxy
agents, system shutdown software, and
supervision software.
Solution-Pac
TM is a powerful and upgradable
software tool which provides all the
supervision, control and safety functions
associated with a UPS:
v graphic display of the UPS,
v remote control of the UPS and output
receptacles,
v user alarm of problems,
v recording of events in log files,
v automatic system shutdown and restart,
v local or remote supervision of UPSs and
ancillary devices,
v transmission of UPS information and
alarms to any SNMP supervisor.
v paging / e-mail capabilities
v multiple server shutdown in
heterogeneous environment.
Platforms supported:
Windows 3.1, 95, 98, NT, Novelle Netware,
OS/2, Linus, Mac/OS, Sun Solaris, HP/UX,
IBM Aix, Dec Unix and Open VMS, Silicon
Graphics, IRIX.