As/400 settings for version 3.2, Configuring psf with crtdevprt on v3r2, 2, as/400 settings for version 3.2 – MPI Technologies LaserJet 2100 User Manual
Page 13
A printout should look like the following:
QPQXWAFP
--------
DEVD
HP_IPDS
IPDSPASTHR
*YES
TCPIP
*YES
RMTSYS
192.194.134.90
PORT
9100
ACTTMR
*NOMAX
INACTTMR
*SEC15
SBP
*NO
PSC
*YES
DRF
*NO
DRR
*NO
EDGSNSTV
*NO
Then do the following:
Ping the IP address to verify communication with the printer:
PING ’192.194.134.90’
Vary the printer on:
VRYCFG HP_IPDS CFGTYPE(*DEV) STATUS(*ON)
Start the print writer:
STRPRTWTR HP_IPDS
4.2 AS/400 Settings for Version 3.2
To configure IPDS on AS/400 V3R2, use the following commands:
- CRTDEVPRT
- CRTPSFCFG
4.2.1 Configuring PSF with CRTDEVPRT on V3R2
On the AS/400 command line, enter a command in the form:
CRTDEVPRT DEVD(HP_IPDS) DEVCLS(*RMT) TYPE(*IPDS)
MODEL(0) AFP(*YES) AFPATTACH(*APPC)
FONT(11)RMTLOCNAME(TCPIP) FORMFEED(*AUTOCUT)
TEXT('IDATA IPDS DIMM')
13