As/400 settings for version 3.7, Configuring psf with crtdevprt on v3r7, 4, as/400 settings for version 3.7 – MPI Technologies LaserJet 2100 User Manual
Page 17
A printout should look like the following:
QPQXWAFP
--------
DEVD HP_IPDS
IPDSPASTHR *YES
TCPIP
*YES
RMTSYS
192.194.134.90
PORT 9100
ACTTMR
*NOMAX
RLSTMR
*SEC15
SBP
*NO
PSC
*YES
DRF
*NO
DRR
*NO
EDGSNSTV
*NO
Then do the following:
Ping the IP address to verify communication with the printer:
PING ’192.194.134.90’
Vary the printer on:
VRYCFG HP_IPDS CFGTYPE(*DEV) STATUS(*ON)
Start the print writer:
STRPRTWTR HP_IPDS
4.4 AS/400 Settings for Version 3.7
To configure IPDS on AS/400 V3R7, you use the following commands:
- CRTDEVPRT
- CRTPSFCFG
4.4.1 Configuring PSF with CRTDEVPRT on V3R7
At the AS/400 command line, enter a command in the form:
CRTDEVPRT DEVD(HP_IPDS) DEVCLS(*LAN) TYPE(*IPDS)
MODEL(0) LANATTACH(*IP) AFP(*YES) PORT(9100)FONT(11)
FORMFEED(*AUTOCUT) RMTLOCNAME('192.194.134.90)
USRDFNOBJ(AFP/NETWRKPRT *PSFCFG) TEXT('IDATA IPDS
DIMM')
17