MPI Technologies LaserJet 2100 - Manual (Page 5)

3 Configuration
3.1 Using the Web Browser
Through a web browser it is possible to configure the IPDS DIMM and to perform
various advanced test functions.
3.1.1 Requirements
A web browser, for example Microsoft Internet Explorer 4.0 or Netscape
Navigator 4.0 or higher.
A TCP/IP enabled EIO Interface Card with an IP address.
3.1.2 Getting Started
1. Start the web browser.
2. After http://, type the IP address of the PrintServer followed by
:9100/ipds/ in the web browser’s Address or Location box. The web
browser will load the IPDS Menu from the IPDS DIMM.
Note: The loading of the page may take more than a minute.
Figure 1, IPDS Menu
5