Marantz RC1400 - Manual (Page 16)

14
ENGLISH
BASIC OPERATION
USE Mode
(Normal operation status)
This remote control is preset with a total of 12
types of remote codes, including Marantz TV
(television), DVD, VCR (VCR deck), DSS
(satellite broadcasting tuner), TUNER, CD,
CD-R, MD, TAPE (tape deck), AUX1, AUX2,
and AMP (amplifier).
Learning is not necessary for Marantz
products. You can use these products without
setting any codes.
1 Press the SOURCE button !4.
For this example, press DVD.
DVD is shown on the LCD, and the remote control is
set for DVD.
Pressing the source button once changes the remote
control to the settings for the source that was pressed.
To change the amplifier or other source, press the
SOURCE button twice (double-click). The code is
sent, and then the amplifier source changes to DVD.
2 Press the buttons to operate the DVD.
The indicator is shown on the LCD while the
remote control codes are being transmitted. It is not
displayed when buttons without stored code are
pressed.
3 The direct buttons t can be used to
perform up to 20 operations for each of the
12 sources, including DVD, TV, AMP, and
other AV equipment.
The buttons consist of the D1 to D5 buttons, and the
equipment is operated by pressing the buttons
corresponding to the indicators on the LCD.
Four pages are available, and press the > button to
select a page. The current page position is displayed
on the LCD.
03.10.6, 4:17 PM Page 14