Marantz RC1400 - Manual (Page 7)

5
ENGLISH
i MUTE button
This button is used to mute the audio for the
amplifier and television.
o GUIDE button
This button is used to display the menus for the
DVD player, DSS (satellite broadcasting
tuner), or other AV equipment.
!0 EXIT button
This button is used to cancel settings in the
menu or program.
!1 Numeric buttons
These buttons are used to switch between 0 to
9 of the source components. If the source is set
to the amplifier, these buttons are used to
perform operations corresponding to those
shown on the text plate.
!2 MEMO button
This button is used to store settings to memory
or program a source.
!3 CONTROL button
These buttons are used when operating the
PLAY, STOP, PAUSE, and other commands of
a source.
!4 SOURCE button
These buttons are used to switch the source of
your A/V Receiver / amplifier. Each time a
source button is pressed, the remote control
changes to the source which was pressed.
This remote control can control 12 types of
equipment. To change the A/V Receiver /
amplifier source, press this button twice within
two seconds. The signal is sent when it is
pressed the second time.
!5 LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD
and its buttons. This lighting time can be set. If
the lighting time is set to 0 seconds, the
backlight turns on only while this button is
pressed. The operations for LIGHT 1 and 2 are
identical.
!6 CLEAR button
This button is used to erase the memory or
program of a source.
!7 MENU button
This button is used to display the OSD menu of
an amplifier or other source.
!8 PREV (Previous) button
This button is used to return to the previous
channel on the television or other device.
03.10.6, 4:17 PM Page 5