Magellan eXplorist XL - Manual (Page 24)

16
Inputting Data
Moves the cursor
one space , left or
right
Scrolls through the
icons or
alphanumeric list
The UP/DOWN and LEFT/RIGHT ARROWs have two functions depending
on how the ARROW ICONS are displayed in the bottom right corner of
the various screens.
While on some screens the UP/DOWN or LEFT/RIGHT ARROWs are used
to access additional pages, on other screens they allow you to input
data, such as waypoint names or coordinates, or to select menu items.
The ARROW ICONS in the status line indicate which mode is currently
being used. Whenever there are additional screens to view from the
one displayed, the receiver shows normal arrow icons (
) in the lower
right corner of the display. A second type of arrow may be displayed in
the lower right hand corner. These arrows are similar to the first, but
are displayed in reverse video (
) and are referred to as “input” or
“edit arrows.” When these reverse video arrow icons appear, the arrow
keys are used to enter data or make selections on the current display,
rather than to move from screen to screen.
Turning the Light ON and OFF
To activate the display light, press the LIGHT key. To deactivate the display
light, press the LIGHT key again.
LIGHT
The receiver will indicate that the light is on with a light bulb icon ( ) in
the status line next to the arrow icons.
The display light causes an increase in battery drain resulting in shorter
battery life.
Brightness level can be adjusted (LOW/HIGH) in the SETUP MENU.