Magellan eXplorist XL - Manual (Page 56)

48
MENU
Highlight
SAT STATUS
Press ENTER
SAT STATUS
N
2
9
9
0
2
4
Note that the POWER LOCK feature remains active until it is
turned off under SETUP.
Light Intensity
LIGHT INTEN. allows you to select the brightness level (HIGH or LOW)
of the display. The light can be switched on and off by holding down
the “LIGHT” key.
Additional Features
Viewing the SAT STATUS Screen
This screen displays the satellites by their signal strength and their
position in the sky relative to your location. An asterisk (*) indicates
that the unit is not locked on to that particular satellite. When lock is
achieved the * will be replaced by the signal strength of the satellite.
Signal strength will range from 0 to 9, with 9 representing better signal
strength.
MENU
Highlight
SETUP
Press ENTER
Highlight
CONTRAST
Press ENTER
Use LEFT/RIGHT
ARROWS to adjust
contrast
OR
ENTER
From any
NAV or PLOT
Screen
Highlight
CONTRAST
Press ENTER
ENTER
MENU
Highlight
SETUP
Press ENTER
Highlight
LIGHT INTEN
Press ENTER
Use UP/DOWN
ARROWS to select
HIGH or LOW
ENTER
Contrast
CONTRAST allows you to adjust the contrast level of the display to
allow you to select the best contrast level for the particular environment
you are in.
Press MENU, highlight SAT STATUS and
press ENTER. The receiver displays the
SAT STATUS screen.