MaxTech Transceiver - Manual (Page 36)

37
Multi-pop Mode
Set In terval Sc reen
T R AN SM IT U nit
5.00 sec ond M ulti-pop In terval
10 trigger Count
ë
For delays longer than the 6.4 seconds (maximum available in delay modes) use
Intervalometer or Multipop mode. Set the interval to the desired delay. Set the count
to 1. A ttac h your cam era to P O R T 1 an d trig ger th e M ultiM AX . T he c am era w ill
trigg er aft er the set in terval.
N
Contact time affects Intervalometer mode. If the contact time is less than one
second then Intervalometer will function normally. If the contact time is longer than 1
sec ond th en the s et interval increas es p er this f ormu la: Con tact T ime P LU S In terval
time MINUS 1 second. Example: If the Contact Time is set to 3 seconds and the
Interval is set to 5 seconds , the actual interval will be 7 seconds (3+5-1=7 ).
L
W hen u sing Intervalometer an d R elay Mode togeth er, a Mu ltiMA X (s et for
RECEIVE mode) will switch to Transmit mode and send a Radio trigger after the last
interval. See the Relay M ode sec tion, Pag e 40, f or mor e inform ation
C: Multipop – ~ / M E N U A C
Enters the Multipop interval setting screen. This mode
is for triggerin g a flas h m ultiple times from one trigg er.
It can be used during one long exposure to increase
depth of field or for special effect sequencing. The
interval setting is normally used to set a safe flash
recyc ling tim e, while the c ount is set to the n um ber of
flashes or “pops” desired.
Mu ltipop is iden tical in fu nc tion to Intervalometer w ith
one excep tion: the m ultipop inter val range has finer
resolution; from 0.01 to 640.00 seconds in 0.01 (1/100)
sec ond inc remen ts. T his allows for fin er con trol when
setting flash recyc le time. T his m ode can be us ed for
cam eras or f lash u nits.
1. From the main screen press ~ / M E N U A C to
enter the numeric entry screen
2. Enter the interval or time gap between triggers
3. Press ~ / M E N U to proc eed to the next s creen
4. Enter the count or number of triggers
5. Press ~ / M E N U to return to th e main s creen .
T he in terval will b e dis played, and the c oun t will
sh ow the n um ber of trig gers to be executed
6. Pres s th e TEST key or trig ger th e M ultiM AX via
Rad io to begin M ultipop f unc tion