MicroNet Technology SP755D - Manual (Page 44)

39
Relieve the need of a workstation running the remote printer utility.
Improve productivity by locating the printer near the workgroup.
Each print server should log into a NetWare server before servicing the
print jobs. Each print server will occupy a user account with which it can
log into the NetWare server.
5.2 NetWare 3.x/4.x/5.x Installation & Setup
Once your print server is connected to your Ethernet network, you can set
it up for use with your networking software.
5.2.1 Installation Using PCONSOLE
5.2.1.1 Configuring as Print Server Mode
1. Run the NetWare PCONSOLE program.
2. Change the current file server, if necessary, using the Change
Current File Server menu selection.
3. Choose the Print Queue Information menu selection.
4. Press the Insert key to add a new print queue.
5. Type in a print queue name, such as “PQ” or “Q1”.