MicroNet Technology SP755D - Manual (Page 53)

48
7. Configuration Utility
7.1 Introduction
This chapter introduces print server’s system configuration utility in
Windows environment. This utility is automatically installed during
Windows Administrator Utility installation procedure - refer to section 3.2
and 3.3.
This utility provides the most complete management and configuration
functions on the print server side. This utility only provides configuration
functions for print server itself; it does not include configuration functions
for client side or other file server or NetWare server in the network
environment.
The Configuration Utility provides the following configuration and
management functions:
z Search Print Server: Search All Available Printer Servers on the
Network.
z Print Server Status: Display Print Server Network Status.
z General Configuration: General Information of print server.
z TCP/IP Configuration: IP Address and DHCP Server Configuration.
z NetWare Configuration: NetWare Printing Configuration.
z AppleTalk Configuration: AppleTalk Protocol Setting.
z SNMP Configuration: SNMP Information Configuration.
z SMB: Configure the SMB Group Name.
z System Configuration: Print Server Network Ability Setting and
Firmware Upgrade.
z Setup Wizard: Guide You Through All the Settings.
z Report: List the Status of All Available Print Servers on the
Network.
We will explain each function separately in the following section.