Time left display 41, Using the residual heat (energy save function) 41, Food probe – Miele H 5981 BP User Manual

Page 41

Advertising
background image

The approximate finish time can be
estimated, as the duration of a cooking
programme using the food probe
corresponds more or less to the
duration of the same programme
without the food probe.

The "Duration" and "Finish" cannot be
entered as the total time depends on
how long it takes for the core
temperature to be reached.

Time left display

After a certain time the estimated time
remaining
, appears in the oven
display.
The actual core temperature is no
longer displayed and cannot be called
up.

The time remaining is calculated from
the oven temperature selected, the
required core temperature and the
pattern of the increasing core
temperature.

The time remaining first shown is an
estimate. As the cooking process
continues the time remaining is revised
continuously, and a more accurate
revised figure shown.

If, while the time remaining is showing
in the display:

– the oven or core temperature is

altered,

– or a different oven function is

chosen,

– or the door is left open for a

particular length of time

all the "time remaining" information will
be cancelled and the actual core

temperature will re-appear in the
display. The time left display will
reappear after a while.

If the door is opened during an Auto-
matic programme the time remaining
will continue to show in the display.

Using the residual heat (Energy save
function)

The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.

Using the residual heat in the oven
saves energy.

"Energy save" will appear in the display
to show that the oven is in energy save
mode. The time remaining will continue
to be visible in the display.

The cooling fans continue to run, as do
the hot air fans if a "fan" setting has
been chosen.

When the core temperature selected
has been reached,

– the oven switches off automatically.

– the message "Programme finished"

and the

O

symbol appear in the

display.

– a polyphonic tune plays.

If the food is not yet cooked sufficiently,
insert the food probe into another place
and repeat the programme.

Food probe

41

Advertising