Miele H 5981 BP - Manual (Page 51)

Catalyser
ß On
(Factory default)
The catalyser is always switched on.
ß Off next programme only
The catalyser will be switched off for
the next programme only.
Cooling fan run-on
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
ß Sensor controlled
(Factory default)
The auto sensor will switch off the
cooling fans.
ß Temperature controlled
The cooling fans will switch off when
the temperature in the oven
compartment drops below approx.
70 °C.
ß Time controlled
The cooling fans will switch off after
approx. 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fans to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Condensate can
–
damage the housing unit/
worktop.
– lead to corrosion in the oven.
Pyrolytic
ß With reminder
A reminder to carry out the pyrolytic
cleaning process will appear in the
display.
ß Without reminder
(Factory default)
You will not be reminded to carry out
the pyrolytic cleaning process.
Heating-up phase
The heating-up phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
ß Rapid
(Factory default)
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
R and "Rapid heat-up phase" or
"Rapid searing phase" will appear in
the display.
ß Normal
Only the heating elements for the
cooking function selected are
switched on.
3 and "Heating-up phase" or
"Searing phase" will appear in the
display.
Settings
51