Miele H 5981 BP - Manual (Page 53)

Keypad tone
The volume of the keypad tones, which
beep when touched, can be changed
or the sound switched off completely.
P P P P G G GM
Factory default: Three illuminated
segments.
To change the volume touch the sensor
next to "Quieter" or "Louder".
If all segments are illuminated the
volume is on maximum.
If none of the segments are illuminated
the volume has been turned off.
Welcome melody
ß On
(Factory default)
A melody will be heard when the
oven is switched on.
ß Off
No melody will be heard when the
oven is switched on.
Speedlight
The options are:
ß In use
ß In standby mode
ß Colour in standby mode
In use
ß On
(Factory default)
The SpeedLight illumination under
the control panel comes on when the
oven is switched on.
ß Off
The SpeedLight illumination under
the control panel does not come on
when the oven is switched on.
In standby mode
ß On
The SpeedLight illumination under
the control panel remains switched
on when the oven is switched off.
ß Off
(Factory default)
The SpeedLight illumination under
the control panel goes out when the
oven is switched off.
Colour in standby mode
The colour of the SpeedLight
illumination when the appliance is
switched off can be changed.
P P P P G G GM
Factory default: Four illuminated
segments.
To change the colour of the SpeedLight
illumination, touch the sensor next to
"Yellow" or "Red".
If all the segments are illuminated, the
SpeedLight illumination is red.
If one of the segments is illuminated , it
is yellow.
Settings
53