Miele H 5981 BP - Manual (Page 85)

,
The oven must not be operated
until it has been correctly installed in
its housing unit. Otherwise it poses
an electric shock hazard.
To ensure adequate ventilation to
the oven once installed:
–
do not fit a rear panel into the
housing unit.
– make sure that the shelf on
which the appliance is placed
does not touch the wall.
– do not fit insulation material
inside the housing unit.
When installing the appliance, do
not lift it up by the door handle as
this can damage the door.
Turn off the mains electricity supply
to the isolator.
Remove the handles at the sides.
^ Connect the mains cable from the
oven to the isolator.
^ Push the appliance into the oven
housing unit and align it.
^ Open the oven door and using two
screws secure it to the side walls of
the housing unit through the holes in
the oven trim.
Installing the oven
85