MaxTech xpm56i V.42bis User Manual
Page 34
14
CONNECT 7200/REL-MNP
37
CONNECT 9600/REL-MNP
38
CONNECT 12000/REL-MNP
39
CONNECT 14400/REL-MNP
40
CONNECT 300/REL-MNP 5
42
CONNECT 1200/REL-MNP 5
44
CONNECT 2400/REL-MNP 5
45
CONNECT 4800/REL-MNP 5
46
CONNECT 7200/REL-MNP 5
47
CONNECT 9600/REL-MNP 5
48
CONNECT 12000/REL-MNP 5
49
CONNECT 14400/REL-MNP 5
50
CONNECT 1200/REL-LAPM
54
CONNECT 2400/REL-LAPM
55
CONNECT 4800/REL-LAPM
56
CONNECT 7200/REL-LAPM
57
CONNECT 9600/REL-LAPM
58
CONNECT 12000/REL-LAPM
59
CONNECT 14400/REL-LAPM
60
CONNECT 1200/REL-LAPM V.42BIS
64
CONNECT 2400/REL-LAPM V.42BIS
65
CONNECT 4800/REL-LAPM V.42BIS
66
CONNECT 7200/REL-LAPM V.42BIS
67
CONNECT 9600/REL-LAPM V.42BIS
68
CONNECT 12000/REL-LAPM V.42BIS
69
CONNECT 14400/REL-LAPM V.42BIS
70
Section Six - Troubleshooting
This section describes some of the common problems
you may encounter while using your modem. If you can not
resolve your difficulty after reading this chapter, contact your
dealer or vendor for assistance.
Modem does not respond to commands.
1.
Make sure the modem is not configured with a conflicting
COM port and IRQ setting (see Section 2.4). Your modem
can not be configured as COM1 (default) if another device in
your system is also configured as COM1. Similarly, IRQ
settings may not overlap.
2.
Make sure the communication software is configured to
“talk” to the modem on the correct COM port and IRQ setting
(same COM port and IRQ setting as the modem). Your
communication software must know which address your
modem is using in the system in order to pass data to it.