Mr. Heater SRPH02S - Manual (Page 6)

6
ASSEMBLY
NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
Step 1 ----
Step 1
Step 2 ----
Step 2
M5 X 8 bolts (6 pcs) and 5mm washers (6 pcs)
Attach the post to the post mounts using
Attach Post to Base Assembly
7
Attach Cylinder Cover to Post Mounts
Attach the cylinder cover to the post mounts by
sliding over post as indicated.
7
6
14
11
5