Mr. Heater SRPH02S - Manual (Page 8)

Step 5 ---- Attach Center Reflector to Reflector
Attach center reflector to the top of reflector (4 pcs)
with M6 X 10 mm screws (12 pcs),
Step 5
2
1
15
6mm washers (12 pcs) and nuts (12 pcs).
Step 6 ---- Attach Center Reflector and Reflector
Attach center reflector and reflector to the top
of head assembly by sliding over
M6 X 70 double threaded bolts (3 pcs).
to the top of Head Assembly
Fasten with 6mm washers (3 pcs) and nuts (3 pcs).
10
9
8
NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
ASSEMBLY
Step 6
3
10
9