MITSUBISHI ELECTRIC DX-TL4U - Manual (Page 31)

Four-Channel Digital Video Recorder
21
Figure 29 — System Check (Alarm Out / Notify) screen.
Highlight the box under the Alarm Out heading and press the button. A drop menu displays
available alarm outputs for the recording problem. Highlight the desired alarm output from the
external alarm out terminal or internal buzzer, and press the button.
NOTE: Alarm Out cannot be set to Check Point – System.
Highlight the box under Notify and press the
button. This toggles between On and Off. When it
is On, the DVR notifies the remote site of its System (Good) and Record (Bad).
Storage Screen
Highlight Storage in the Main menu and press the button. The Storage setup screen appears.
Figure 30 — Storage screen.
The Type field displays the type and capacity of storage device.
The Status field displays the device status or fault conditions. (Good, Disk Bad, S.M.A.R.T.
Alert, High Temperature, or Not installed)