MITSUBISHI ELECTRIC DX-TL4U - Manual (Page 64)

User’s Manual
54
Highlight the box beside SMTP Server IP and enter the SMTP server IP address, obtained from
your system administrator.
Highlight the box beside E-mail recipient and enter the recipient’s e-mail address. Use the virtual
keyboard to enter the e-mail address.
Highlight the box beside E-mail sender and enter the sender’s e-mail address.
NOTE: The e-mail address must include the character “@” to be a valid address.
Highlight the box beside Authentication and press the button to toggle between On and Off.
Highlight the box beside ID and enter the SMTP ID. A virtual keyboard appears allowing you to
enter the ID.
Highlight the box beside Password and enter the SMTP password. A virtual keyboard appears
allowing you to enter the password.
NOTE: Authentication should be turned On and ID and Password should be entered when
using the SMTP server requiring user authentication.
Callback Center Setup by Modem connections
Figure 72 — Callback Center (Modem) Setup screen.
Highlight the box beside Pager Number and enter the telephone number of the pager. Enter the
number as it must be dialed from your telephone system; e.g., if you must dial “9” for an outside
line, enter “9” before the pager number.
Highlight the box beside Mailbox and enter the voice mailbox number if your pager uses a voice
mailbox.
Highlight the box beside Site ID and enter a three-digit site ID number.