MITSUBISHI ELECTRIC DX-TL4U - Manual (Page 35)

Four-Channel Digital Video Recorder
25
You can assign titles to each camera by highlighting the Title heading and pressing the button.
A virtual keyboard allows you to enter camera names.
Selecting the PTZ Device box causes a list of controllable cameras to display. Select your camera
from the list and press the button. You will need to connect the camera to the RS-232C terminal
on the back of the DVR following the camera manufacturer’s instructions.
Figure 35 — PTZ Device list.
NOTE: When selecting the PTZ device you wish to control by selecting it from the menu, the
displays on the PTZ camera screen.
You can assign IDs to each camera by highlighting the ID heading and pressing the button.
Change the number by highlighting it and using the arrow buttons to increase and decrease the
number. The PTZ ID number can be set from 0 to 256.
Alarm In Setup Screen
Highlight Alarm In in the Main menu and press the button. The Alarm In setup screen appears.
Figure 36 — Alarm In setup screen.