Microsoft CP-D31N - Manual (Page 11)

11
3. Network Functions
3.1 Configuring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a computer that is connected to the same network.
(
12)
3.2 E-mail Alerts
The projector can automatically send an alert to specified e-mail addresses when
the projector requires maintenance or has encountered an error.
(
34)
3.3 Projector Management using SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specified
computer.
(
36)
3.4 Event Scheduling
You can schedule the projector to perform various functions according to the date
and time.
(
37)
3.5 MY IMAGE (Still Image Transfer) Display
The projector can display still images that are transferred via the network.
(
40)
3.7 Command Control via the Network
The projector can be controlled using RS-232C commands over a network.
(
44)
3. Network Functions
This projector is equipped with the following network functions by using a web
browser software.
3.8 Controlling the external device via the projector
(using the NETWORK BRIDGE function)
Using the NETWORK BRIDGE function can control an external device as a
network terminal, via this projector from the computer.
(
49)
3.6 Messenger Function
The projector can display the text data transferred via the network on the screen.
(
42)