Microsoft CP-D31N - Manual (Page 45)

45
3. Network Functions
3.7 Command Control via the Network (continued)
When the authentication setting is enabled, the following settings are required.
(
26)
7) Click [Security Settings] on the main menu.
8) Click [Network Control] and enter the desired authentication password.
* See NOTE.
9) Click [Apply] button to save the settings.
• The Authentication Password will be the same for Network Control
Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port:
4352), Image Transfer Port (Port: 9716) and Text Transfer Port (Port: 9719).
• The new configuration settings are activated after restarting the network
connection. When the configuration settings are changed, you must restart
the network connection. You can restart the network connection by clicking
[Network Restart] on the main menu.
NOTE