Microsoft CP-D31N - Manual (Page 23)

23
3. Network Functions
3.1 Configuring and controlling the projector via a web browser (continued)
The schedule settings are shown below.
Item Description
Schedule Click [Enable] check box to enable the schedule.
Date (Month/Day)
Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Click [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item Description
Time Configures the time to execute commands.
Command
[Parameter]
Configures the commands to be executed.
Power Configures the parameters for power control.
Input Source Configures the parameters for input switching.
Display Image
Configures the parameters for display of transfered image
data.
(
40)
Display Text
Configures the parameters for display of transferred text data.
(
42)
Click [Register] button to add new commands to the schedule list.
Click [Delete] button to delete commands from the schedule list.
Click [Reset] button to delete all commands and reset the schedule settings from
the schedule list.
• After the projector is moved, check the date and time set for the
projector before configuring the schedules. Strong shock may make the date
and time settings (
24) get out of tune.
• Events of “Display Image” and “Display Text” will not start appropriately and
schedule execution error occurs if the lamp does not light and/or display data is
not stored in the projector at the scheduled event execution time.
• Events of “Input Source” and “Display Image” will not start if the security
feature is activated and limits the use of the projector.
• Certain errors of the projector (such as temperature error, lamp error) prevent
the projector from appropriate execution of scheduled functions/events.
• Please refer to the Troubleshooting in the User’s Manual - Operating Guide in
case scheduled functions/events are not executed appropriately as you've set.
NOTE