Unpacking, transport and assembly, Filling oil reservoir – MK Diamond Products MK CX-3 User Manual

Page 13

Advertising
background image

MK CX-3

Revision 09/04, Effective Date September 17, 2004

Page 13

UNPACKING, TRANSPORT and ASSEMBLY


4. Filling Oil Reservoir:

NOTE: SAE 10W-30 is recommended for general use in temperatures of – 4ºF (20ºC) and above. If you

are operating outside of this range, consult the chart in this manual.
Engine Oil Capacity is 0.63 US qt (0.6l).









































(C)

Remove the Oil Reservoir

“Dipstick”

(B)

Verify the Oil Drain Cap is

installed onto the Oil Drain Line

and is tight

(A)

Read and remove caution tag

attached to the Gas Cap

(F)

Cleanup any excess oil

(E)

Install the Oil Reservoir

“Dipstick”

(D)

Fill the Oil Reservoir

(CAUTION: Do not overfill)

Read

Turn counter-

clockwise to tighten

Dipstick

Oil Drain

Cap

Oil Drain

Line

Fill through Reservoir

oil level hole

Dipstick

Turn clockwise

to tighten

Wipe up

excess oil

Advertising