Maintenance and troubleshooting, Check fuel level, Checking oil level – MK Diamond Products MK CX-3 User Manual

Page 25

Advertising
background image

MK CX-3

Revision 09/04, Effective Date September 17, 2004

Page 25

MAINTENANCE AND TROUBLESHOOTING

6. Check Fuel Level:


1. Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
2. To fuel, stop engine if running and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools, etc.
5. Wipe up spills immediately.

NOTES:

1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank.

Damage caused by spilled fuel IS NOT covered under the warranty.

2. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
3. Use unleaded gasoline with a pump octane rating of 86 or higher.



































7. Checking Oil Level:

NOTES:

1. Engine Oil Capacity is 1.16 US qt (1.1 l).

2. When installing the Oil Dipstick, ensure the threads are aligned with the threads of the Oil

Reservoir so as not to “cross-thread."
















(C)

Verify fuel level is below the

throat of the Fuel Tank

(B)

Fill Fuel Tank

(A)

Remove Fuel Cap

(D)

Install Fuel Cap

(C)

Check Oil Level if the level is

normal, go to step F, if low, go

to Step D

(B)

Remove Dipstick

(A)

Verify the Engine is upright

and level

Fill Throat

Turn counter-

clockwise to

loosen

Fuel Cap

Fill Throat

Upper Limit

Turn clockwise

to tighten

Fuel Cap

1/2-way up Dipstick

Bottom of Dipstick

Turn counter-

clockwise to

loosen

Dipstick

Level Engine

Advertising