MK Diamond Products MK CX-3 - Manual (Page 31)

MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 31
MAINTENANCE AND TROUBLESHOOTING
11. Fuel Sediment Cup Cleaning:
1. Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
2. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools, etc.
3. Wipe up spills immediately.
NOTES: 1. Conform to Federal, State and Local laws for the proper disposal of fuel
2. Fuel can damage paint and plastic. When filling, be careful not to spill fuel. Damage caused
by spilled fuel IS NOT covered under the warranty.
3. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
5. When installing the Sediment Cup ensure the threads of the cup are aligned with the threads
on the engine so as not to “cross-thread the cup.
(A)
Place Fuel Valve in the OFF
position
(C)
Remove the Fuel Sediment Cup
(The Cup will contain fuel)
(B)
Loosen the Fuel Sediment Cup
Turn clockwise
to tighten
(D)
Clean Fuel Sediment Cup using a
nonflammable solvent – allow
Sediment Cup to dry
(E)
Reinstall and tighten the Fuel
Sediment Cup
(I)
Install the Blade Retaining Screw
Retaining
Screw
(J)
Install the Blade Retaining Screw
Wrench and the Blade Shaft Wrench
and tighten the Retaining Screw
Retaining Nut
Wrench
Shaft
Wrench
(H)
Install the Outer Flange and verify it
is seated against the Blade
Flush Against
Blade
Outer
Flange
Blade
Direction of
Movement
Fuel Valve Turn counter-
clockwise to
loosen
7/16” Wrench
Fuel Sediment
Cup
Clean Fuel
Sediment Cup
7/16” Wrench