Motorola ML910 User Manual
Page 93
Advertising
Expanding Your Computer
4-11
5. Launch the ML User Application.
6. Select the RF Pass-Through option available in the MLUA.
7. Before the RF Pass-through User Control in MLAA is changed to [Enable], the RF
Pass-Through Control will be grayed-out.
8. After the RF Pass-through User Control in MLAA has been set to [Enable], the
default setting will be [Automatic Selection].
9. User can select [Manual Selection] to either Enable or Disable the RF
Pass-through. [Apply] needs to be pressed by User in order to make the selection
valid.
10. Enabling the RF Pass-Through will disable the Internal Antenna and vice-versa.
1 2
3 4
Advertising