Maretron MBB100 - Manual (Page 10)

MBB100 User’s Manual
Step 3: Once aligned, gently insert the serial cable RS-232 connector into the MBB100 RS-232
connector.
2.4.2 VGA Connection
There is one external VGA connector. The VGA connector enables connection to an monitor. To
connect a VGA cable with the VGA connector, please follow the instructions below.
Step 1: Locate the VGA connector on the rear panel of the MBB100.
Step 2: Align the VGA connector on the cable with the VGA connector on the rear panel of the
MBB100.
Step 3: Once aligned, gently insert the cable VGA connector into the MBB100 VGA connector.
2.4.3 LAN Connection
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to an external
network. To connect a LAN cable with the RJ-45 connector, please follow the instructions below.
Step 1: Locate the RJ-45 connector on the rear panel of the MBB100.
Step 2: Align the RJ-45 connector on the LAN cable with the RJ-45 connector on the rear panel of
the MBB100 (see Figure 6).
Figure 6 – LAN Connection
Step 3: Once aligned, gently insert the LAN cable RJ-45 connector into the onboard RJ-45
connector.
Page 6 Revision 1.0