Maretron MBB100 - Manual (Page 20)

MBB100 User’s Manual
Page 16 Revision 1.0
5 Troubleshooting
If you notice unexpected operation of the Maretron MBB100, follow the troubleshooting
procedures in this section to remedy simple problems.
Symptom Troubleshooting Procedure
No activity on the display Check the connection to the power and network
connectors and tighten if necessary
Ensure that power is supplied to the connected
power cable.
Check the connection to the power jack located on
the rear of the device.
Press the power switch located on the front of the
device on the right-hand side.
Other Issues Please refer to the Troubleshooting section of the
N2KView
®
User’s Manual.
If these steps do not solve your problem, please contact Maretron Technical Support (refer to Section
0 for contact information).
Warning: There are no user-serviceable components inside the Maretron MBB100. Opening the
MBB100 will expose the sensitive electronic components to adverse environmental conditions that
may render the unit inoperative. Please do not open the MBB100, as this will automatically void the
warranty. If service is required, please return the unit to an authorized Maretron service location.