Millennium Enterprises Stereo150 - Manual (Page 14)

13) Speed/1 Knob - This knob controls the Speed of modulation effects when the unit is in Preset mode. In Edit or Utility mode, it controls
the number 1 parameter that appears in the display.
14) Depth/2 Knob - This knob controls the Depth of modulation effects when the unit is in Preset mode. In Edit or Utility mode, it controls
the number 2 parameter that appears in the display.
15) Delay/4 Knob - This knob controls the overall level of Delay when delay is used in the selected Preset. In Edit or Utility mode, it controls
the number 3 parameter that appears in the display.
16) Reverb Knob - This knob controls the overall level of Reverb when a Reverb Module is used in the selected Preset. In Edit or Utility mode,
it controls the number 4 parameter that appears in the display.
17 a-f) FX Library Buttons:
17a) [Config] - Enters Edit mode at the configuration screen. You can use the <Speed/1> knob to select any one the 15 different effect con-
figurations.
17b) [Mod] - Enters Edit mode and selects the first available Modulation module in the Preset. Successive presses move to the next available
Modulation module. Pressing and Holding the button while editing an effect will load the first Modulation effect in the effect list.
Modulation effects available: Dual Chorus, Quad Chorus, Octal Chorus, Dual Flange, Dual Phaser, Rotary Speaker Simulator, Stereo
Tremolo, Auto Panner, Chorus/Delay and Flange/Delay.
17c) [Delay] - Enters Edit mode and selects the first available Delay module in the Preset. Successive presses move to the next available Delay
Module. Pressing and Holding the button while editing an effect will load the first Modulation effect in the effect list. Delay Effects
available: Delay, Dual Delay, Quad Delay, Stereo Delay, Stereo Dual Delay, Stereo Quad Delay, Long Delay, Analog Delay, Stereo Analog
Delay, Chorus/Delay and Flange/ Delay.
17d) [Reverb] - Enters Edit mode and selects the first available Reverb module in the Preset. Successive presses move to the next available
Reverb module. Pressing and Holding the button while editing an effect will load the first Modulation effect in the effect list. Reverb
Effects available: Pre Delay, Reverb, Dual Reverb, Stereo Dual Reverb, Stereo Reverb, Gated Reverb, Spring Tank and Room Echo.
17e) [Other] - Enters FX Edit mode and selects the first available Digital Effect Modules not included in above selections. Successive presses
move to the next available Digital Effect Module until finally reaching the Master Mix Module. Pressing and Holding the button while
editing an effect will load the first Modulation effect in the effect list. Modules available in the Other section: Dual Detune, Quad
Detune, Octal Detune, Smooth Pitch Shift, Dual Pitch Shift, Quad Pitch Shift, Octal Pitch Shift, Stereo Pitch Shift, Stereo Dual Pitch Shift,
Whammy, Harmony, Compressor, Auto Wah, GEQ 8, GEQ 15, GEQ 31, St GEQ 8, PEQ 3, PEQ 6 and St PEQ 6.
17f) [TapIt] -The TapIt button is used to set the delay time of repeats. To use the TapIt button, simply press the TapIt button twice at the
desired tempo and the delay module will automatically recalibrate the delay time. A great option with the TapIt delay time function is
that the TapIt function can be assigned to be controlled by a footswitch on the J-3 or J-12 foot controller.
18) Power Switch - Turns the unit on and off. It is always a good idea to turn the Master Volume Output down when applying power or
shutting the Millennium down
Section -1 Introduction Johnson Millennium
User Guide
6