Millennium Enterprises Stereo150 - Manual (Page 79)

Other Footswitch Functions
The footswitches on the J-12 can be assigned to do several functions. This is done through the Foot Controller menus in the Utility section of
the Millennium. These functions include:
Toggle MIDI CC : This function allows you to send MIDI Continuous Controller (CC) information out the MIDI port while the footswitch
still maintains its ability to control a parameter directly. When assigned to a footswitch, CC values 0 or 127 are sent. CC numbers 0 through
127 are available.
Exp CC send : The Expression pedals of the J-12 can also send MIDI CC data to other MIDI devices.
The procedure for setting up a MIDI CC toggle footswitch function is as follows:
1. Press the <Utility> button once. The display reads:
2. Turn the <Page> knob to page 10 and the display reads:
3. Turn the <2> knob to select the bank in which the CC toggle is to used. Once the bank is selected, use the <3> knob to select the
footswitch to be used. The display reads:
4. The display now shows that footswitch 6 in bank 1 is set to toggle CCs. Take notice that (from the factory) when footswitches 6-0 are
selected, you can assign that footswitch a CC number from 0-127 by turning the <4> knob.
C1FC: Bank FS=Tog CCTran
2
FACTORY USER
1
CHANGED LINK
1 2
CHANGED LINK
6 3
CHANGED LINK
OFF 4
CHANGED LINK
PAGE
10
OF
13
COMP WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
GATE
SEAMLESS
C1FC: Bank FS=Prg CCTran
2
FACTORY USER
1
CHANGED LINK
1 2
CHANGED LINK
1 3
CHANGED LINK
--- 4
CHANGED LINK
PAGE
10
OF
13
COMP WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
GATE
SEAMLESS
Output:Stereo EQ/Mix
2
FACTORY USER
1
CHANGED LINK
2 2
CHANGED LINK
3
CHANGED LINK
LoC 4
CHANGED LINK
PAGE
1
OF
13
COMP WAH TUBE EQ L/R OUTS
DIGITAL
CLIP
GATE
SEAMLESS
Johnson Millennium
User Guide
Section - 6 The J-12 Foot Controller
71