Compressor, User guide – Millennium Enterprises Stereo150 User Manual

Page 59

Advertising
background image

Dly A - B

Controls the percentage of DELAYTIME allocated to delay voices A and B. For example, if DELAYTIME (above) is set
to 1000 ms and DLYA is set to 75%, the voice A delay time is 750 ms. Remember, each voice in the Module can have
any delay time up to 100% of DELAYTIME. Ranges from 0% to 100%.

Dly C - D

See Dly A - B.

Out

Adjusts the overall level of the Delay. Ranges from Off to 100%.

Pan

Controls the stereo soundfield placement of the delay. Ranges from -99 (all left) to 99 (all right).

Out L - R

Adjusts the left or right output level of the Delay. Ranges from Off to 100%.

Out A - B

Adjusts the output level of delay voice A or B. Ranges from Off to 100%.

Pan A - B

Controls the stereo soundfield placement of delay voice A or B. Ranges from -99 (all left) to 99 (all right).

Out C - D

Adjusts the output level of delay voice C or D. Ranges from Off to 100%.

Pan C - D

Controls the stereo soundfield placement of delay voice C or D. Ranges from -99 (all left) to 99 (all right).

Out LA - LB

Adjusts the left-side output level of delay voice A or B. Ranges from Off to 100%.

Out RA - RB

Adjusts the right-side output level of delay voice A or B. Ranges from Off to 100%.

Out LC - LD

Adjusts the left-side output level of delay voice C or D. Ranges from Off to 100%.

Out RC - RD

Adjusts the right-side output level of delay voice C or D. Ranges from Off to 100%.

Compressor

Compressor Parameters

Level

Controls the signal input level fed to the module. Ranges from Off to 100%.

Threshold

Sets the threshold level of the compressor. Ranges from -27 to 0.

Ratio

This parameter sets the compressor ratio. Ranges from 1.5 to 40.

Gain

This parameter controls the amount of gain in the compressor. Ranges from 0 to 200%.

Attack

This parameter controls the attack time of the compressor. Settings are: Slo, Med and Fast.

Release

This parameter sets the release of the compressor. Settings are: Slo, Med and Fast.

Delay

This parameter sets the delay time of the compressor. Ranges from 0 to 10 ms.

Johnson Millennium

User Guide

Section - 4 Editing Modules

51

Advertising