McDATA Sphereon 4500 - Manual (Page 166)

A
A-6 McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
Message Cannot run diagnostics on a port that is failed.
Description Port diagnostics cannot be performed on a port that has failed.
Action Run diagnostics only on an operational port.
Message Cannot run diagnostics on an active E-port.
Description Port diagnostics cannot be performed on an active E-port.
Action Run diagnostics on an E-port only when it is not active.
Message Cannot run diagnostics. The port is not installed.
Description Port diagnostics cannot be performed when the port is not installed.
Action Run diagnostics only on a port that is installed.
Message Cannot save port configuration.
Description Port configuration cannot be saved. The link is down or busy.
Action Retry the operation later. If the condition persists, contact support
personnel.
Message Cannot save SNMP configuration.
Description SNMP configuration cannot be saved. The link is down or busy.
Action Retry the operation later. If the condition persists, contact support
personnel.
Message Cannot set all ports to Negotiate due to port speed restriction on
some ports.
Description Displays if you try to set all ports to Negotiate through the Configure
Ports dialog box and some ports do not support speed configuration.
Action Replace ports that do not support speed configuration with those that
do support more than one speed configuration.