McDATA Sphereon 4500 - Manual (Page 182)

A
A-22 McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
Message Resource is unavailable.
Description The specified operation cannot be performed because the product is
unavailable.
Action Verify that the EFC Server-to-product link is up. If the link is up, the
EFC Server may be busy. Try the operation again later.
S
Message Send firmware failed.
Description Send firmware operation has failed.
Action Retry the operation. If the condition persists, contact support
personnel.
Message SNMP trap address not defined.
Description An SNMP trap address must be defined if a community name is
defined.
Action Define an SNMP address.
Message Stop diagnostics failed. The test is already running.
Description Diagnostics for the port was not running and the Stop was selected on
the Port Diagnostics dialog box. Diagnostics quit for the port for some
reason, but the Stop button remains enabled.
Action Verify port operation. Retry diagnostics for port and select Stop from
the dialog box. If problem persists, contact your service
representative.
Message Stop diagnostics failed. The test was not running.
Description The action to stop diagnostics failed because the test was not running.
Action Informational message.