McDATA Sphereon 4500 - Manual (Page 38)

1
1-22 McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Overview
Enable Call Home Notification
The default setting for the Enable Call Home Notification function is
disabled (unchecked).
Select Enable Call Home Notification from the Maintenance menu to
enable the call-home function for the switch.
The parameters of the call-home feature are configured in
Windows. Refer to the McDATA Sphereon 4500 Fabric Switch
Installation and Service Manual (620-000159) for instructions.
At the bottom of the EFCM Fabric Manager window is an icon
that indicates whether the Call Home feature is enabled. An X
over the telephone icon indicates that the Call Home feature is
disabled in the product manager or in the EFC Manager.
The call-home feature may not be available if you are using a
customer-supplied server platform for the EFC Management
applications.
Backup & Restore Configuration
Select this option to save the product configuration stored on the
switch to the EFC Server hard disk or to restore the configuration
data from the EFC Server. Only a single copy of the configuration
is kept on the server.
This backup is primarily for single-CTP systems, where a backup
is needed to restore the configuration data to a replacement CTP
card. You cannot modify the location or the file name of the saved
configuration.
For additional information on using this option, refer to Backing
Up and Restoring Configuration Data on page 3-29.
You can only restore the configuration to a switch with the same IP
address.
Reset Configuration
Select this option to reset all switch configuration data back to the
factory defaults. A confirmation dialog box displays with a
warning upon selecting the option. For additional information on
using this option, refer to
Reset Configuration on page 5-8.