Moxi Version 4.1 - Manual (Page 37)

Media Center User Guide © 2006 by Digeo, Inc. All rights reserved.
Changing settings
30
The Settings category is where you customize the default media center
settings to suit your needs.
Channel List
The Channel List card displays all available channels. You can modify
the list if there are channels you never watch, or do not want to
appear in the main Channels category after you press the Moxi but-
ton you can modify the list. To modify the list:
1. To remove (or restore) a channel, go to the Channel List card in the
Settings category, if you are not already there.
2. Scroll up or down to the channel you want to remove or restore.
3. Press OK.
That channel no longer appears in the main Channels category or, if
you restored it, appears once again.
Sound Effects
You can adjust the volume for those sounds you hear every time you
push OK, pause, or most any other button on the remote. You can
choose between three volume levels or mute them entirely.
1. To change the sound effects setting, go to the Sound Effects card in
the Settings category.
2. Choose the desired output setting, and then choose close.
Figure 27: Adjusting the sound effects volume.
HDTV Setup
The media center automatically adjusts the video output to match the
broadcast format and the selections you make in the HDTV Setup
card.
The video resolution options are 480i, 480p, 720p, and 1080i. Always
use the best resolution allowed by your TV, the video cable between
the media center and TV, and the broadcast. See table 1 to learn
which resolutions are supported by which cables.
medium
low
mute
close
high
Sound Effects
Settings