Moxi Version 4.1 - Manual (Page 73)

Media Center User Guide © 2006 by Digeo, Inc. All rights reserved.
Getting connected
66
Figure 52: Connecting a standard TV (480i) and stereo audio
4. Plug in the power to start the media center (allow five minutes for
system start-up).
5. Plug the TV and receiver (if used) into a power outlet. On some mod-
els, a two-prong outlet is available on the rear of the media center.
Connecting to the home network
To enable PC Link, the media center needs a full-time connection to
your home network. The connection can be wired (see below) or wire-
less (see Wireless data connection on page 67), although a wired con-
nection is preferred.
Wired data connection
Connect a CAT-5 network cable with RJ-45 plugs between the Ether-
net port on the rear of the media center and your home network. An
Internet connection is not required for PC Link.
Figure 53: Wired home network connection to the media center
Do not connect the media center to a switched power source.
Doing so increases the chance that the media center is turned off
and is not able to record programs as scheduled.
Power B
V
L
R
R CABLE IN
Y
P
P
Composite
audio/video
Stereo Audio
TV
Receiver
3 c
2 c
2 d
S-Video
4
1
Power
USB
V Y
L P B
R P R
CABLE IN
WAN Power Reset 1 3 2 4 5 6
Router
Media Center
CAT-5 cable
CAT-5 cable
Personal
computer